Canmaking

STM System

Air leak detection system for a variety of leak test machines.

Smart Test Module - air test module for containers. Combines pressure sensor and processor in one package for multiple types of air leak detection. Can be used for bell test, decay test, or peak pressure sensing.

System Products

PIM1, RI100, RR100, STM1-1.5, STM1-15, STM1-5, T1

PIM1

A microcontroller based interface module. The PIM1 connects between a master controller, such as a PLC, and one or more STM1 leak test modules, and translates simple ASCII commands from the master controller to message packets intelligible to the STM modules.

Add to quote
QTY 1

RI100

A reset illuminator designed to excite the RESET circuit of an STM1 pressure test module during air leak testing.

Add to quote
QTY 1

RR100

An infrared light receiver designed to sense the report output signal of the STM1 pressure test module.

Add to quote
QTY 1

STM1-1.5

Low pressure: 0 to 1.5 PSI range.

specifications operating instructions
Add to quote
QTY 1

STM1-15

Low pressure: 0 to 15 PSI range.

specifications operating instructions
Add to quote
QTY 1

STM1-5

Low pressure: 0 to 5 PSI range.

specifications operating instructions
Add to quote
QTY 1

T1

The last connector for STM Daisey Chain.

Add to quote
QTY 1

Select Your Cables

Build the Complete System

1 STM Series Control
1 RI100 Reset Illuminator
1 RR100 Infrared Light Receiver
1 T1 Connector
1 CBL112 Series Cable
1 CBL113 Series Cable
1 PIM1 Microcontroller Interface Module

The Prime Controls Way

Our approach is simple. We listen to our customers. Because we know our products work well for various applications, we work closely with our customers to determine the system that will fit their needs. 

Curious if one of our products will work for your specific application? Tell us about it. We will do what we can to help. That’s our promise to you.

Contact Us


Additional Canmaking Solutions

Image for DS60 Series

DS60 Series

Low cost single-probe, contacting double sheet detection system for thin steel and ferrous metals.

Image for MD30 Test Alert System

MD30 TestAlert System

Air leak detection system for Borden/Alcoa-style can body leak testers.

99% of Our Company’s Products Originated as an Idea From One of You.

Why Prime Controls?

We are a customer-focused company. Our primary goal is to help you determine the product that will work best for your business. With Prime Controls, you will get individual attention and dedicated service. Your success is our success.

SEE WHY WE ARE DIFFERENT

How Can We Help?

World Headquarters:

4528 Gateway Circle
Dayton, OH 45440-1712